Direction Finder Downloads
The following versions of software downloads for Doppler’s direction finders are up-to-date and fully functional. In order to evaluate the software without a radio direction finder (RDF), first, download the software. Then, visit our Demos page for instructions on playing back pre-recorded data.
TargetTrack is our latest radio direction finder download. Although the software was developed for our the DDF7000 series RDF, this download will work with our DDF6001 and DDF6002 units too. The current version is 3.2.33. Note that, due to its size, ESRI ArcGIS runtime engine is not included with the download. You may contact the factory for a DVD or link if you wish to use it. A separate license is required for the ESRI ArcGIS runtime engine. This license is available from ESRI. Doppler Systems can also supply it.
Instructions for the TargetTrack Software Download:
- Download the zip file by pressing the link below.
- Unzip the file to a folder on your computer.
- Double click on Doppler.exe.
- Click on Install TargetTrack.
- If SQL Server Compact is not installed, it will need to be installed first, and then TargetTrack will be installed.
If you are upgrading from version 3.0.x, please refer to the release notes for some important information regarding your software download.
If you are upgrading from versions earlier than 3.2.20 you must uninstall TargetTrack before installing the new version.
SignalTrack is a legacy application. For new installations we recommend the TargetTrack application. The SignalTrack software download can be used with the DDF6001, DDF6002 and DDF7001 (MPT) direction finders. If you have previously installed SignalTrack, you can download the upgrade package. The current version is 2.1.8. In order to install the software, download the zip file to your hard drive, open the zip file and double click on Setup.exe. Note that, due to its size, ESRI ArcGIS runtime engine is not included with software download. Contact the factory for a DVD if you wish to use it. The ESRI ArcGIS runtime engine requires a separate license. This license is available at ESRI. Doppler Systems can also supply it.
MPT User Interface (7000 Series)
The MPT User Interface software is a download for the 7000 Series direction finders. In short, it provides a basic interface to display and configure the DF. The suite also includes a utility to reprogram the firmware for future upgrades. Click on the link below to download the installer.
The most current versions of the software components are:
– MPT User Interface v 2.23
– MPT Flash v 1.2.3
– Doppler DF Discover v 1.1.0
If you are running version 2.18 or earlier you must uninstall MPT User Interface before installing the new version.
These will work with all versions of the firmware. However, earlier versions of these programs may not work with the latest version of the firmware (2.22 and later). The self-test generator in a fixed site installation requires Version 2.8.1 or later. The ICOM R9500 support (needs firmware version 2.29 or later) requires Version 2.9.6. ICOM R8600 support (firmware version 2.35) requires Version 2.15. AOR DV1 and ICOM R30 support requires version 2.18 (firmware version 2.40).
BearingTrack is a legacy application for use with the Doppler DDF6001 at a fixed site. For new installations, we recommend the TargetTrack software download. However, the latest version of BearingTrack is provided here for customers who are using it in their present installation. The current version is 4.2.11.
AutoTrack is a legacy application for use with the Doppler DDF6002 in a mobile site. For new installations, we recommend the TargetTrack software download. However, the latest version of AutoTrack is provided here for customers who are using it in their present installation. The current version is 2.0.12.