Identifying Series 6000 and 6100 Hardware Revision Level

In order to identify DDF6000 and DDF6100 series hardware, remove the top cover and look at the logic board. It will match one of the following descriptions.

DDF6102A used in DDF6000A

The daughter board is DDF6112.

U133 is 9.8304 MHz.

U129 (MACH 110) is marked “DOPWFRM VER 1.14”.

Identify DDF6000 and DDF6100 series hardware: DDF6102A used in DDF6000A — **DDF6102A used in DDF6000A**

Return to Firmware Upgrades.

DDF6102B used in DDF6000B and DDF6100B

The upper left stencil is DDF6102B.

U133 is 9.8304 MHz.

U129 (MACH110) is marked “DOPWFRM VER 1.14”.

Identify DDF6000 and DDF6100 series hardware: DDF6102B used in DDF6000B and DDF6100B — **DDF6102B used in DDF6000B and DDF6100B**

Return to Firmware Upgrades.

DDF6102C used in DDF6000C and DDF6100C

Stencil in upper left is DDF6102C.

U133 is 9.8304 MHz.

U129 (MACH111) is marked “DOPWFRM1 V2.00”

Identify DDF6000 and DDF6100 series hardware: DDF6102C used in DDF6000C and DDF6100C — **DDF6102C used in DDF6000C and DDF6100C**

Return to Firmware Upgrades.

DDF6102D used in DDF6000D, DDF6000d, DDF6100D and DDF6100d

Stencil in upper left is DDF6102D.

U129 (MACH111) reads “DOPWFRM1 V2.00”

U133 is either 9.8304 or 9.2160 MHz. The DDF6000D and the DDF6100D series use the 9.8304 MHz oscillator. DDF6000d and DDF6100d use the 9.2160 MHz oscillator.

**DDF6102D used in DDF6000D, DDF6000d, DDF6100D and DDF6100d**

Return to Firmware Upgrades.

DDF6102E used in DDF6001e, DDF6001f and DDF6002f

Stencil in upper left is DDF6102E.

U124 (MACH211) says either WAV2PH V110 or V111. DDF6001e uses Version 110. DDF6001f and DDF6002f uses Version 111.

U115 is 9.2160 MHz.

**DDF6102E used in DDF6001e, DDF6001f and DDF6002f**

More Info for DDF6000 and DDF6100

For further reading regarding the DDF6000 and DDF6100 series, please visit our Firmware Upgrades page. If for some reason you cannot find the information you are looking for, feel free to contact us.